Modding a Kit Headstock

Advice and tips on building a Carvin Guitars kit.

Moderators: Mike Jones, Bundy, RockCrue, soundchick, ChrisH, peb

User avatar
Posts: 35
Joined: Nov 2007
Location: Cincy, OH

Modding a Kit Headstock

Postby aproud1 » Tue Dec 20, 2016 7:09 pm

Have a BK50 on order and am considering, well, planning on modifying the shape of the headstock. A little less pointy and maybe a little more.

Any one do this? If so, any pics?


User avatar
Posts: 665
Joined: Jan 2007
Location: Kansas Flatland

Re: Modding a Kit Headstock

Postby Praiser » Wed Dec 21, 2016 4:21 pm

I don't have any pics to share, just my rusty memory of a few I've seen in the past.

A couple of them looked great but they had been well planned and executed.
It seems that the majority, however, come off looking like a poorly executed amputation.

I can only recommend that you DESIGN any changes carefully and sketch or trace them out to get the best possible proportions BEFORE removing any wood from the headstock.
If you know the exact look you are going for, the odds of being successful are much greater.
You mention both more pointy and less so it seems you are undecided at this stage the direction you want to go.
Remember that small changes can have a significant visual effect.

Don't forget to allow for the space that the tuners will occupy. Depending on the headstock you have coming, there may not be a lot of real estate to work with.

Obviously, if you are generally artistic or skilled in the area of design, you can give my advise the full value that you paid for it. :mrgreen: :lol:

Good luck!

LB75AP, LB70P, BK50, BK50F, BK40, C780
PB100, PB200 (With BX500 head and 1x15 ext Cab)
XP1000L, LM153s, LS1801A
Rogue Fretless, Ibanez ABG, Dobro Bass
Peavey Fury P Bass

User avatar
Elite Carvinite
Elite Carvinite
Posts: 14006
Joined: Jan 2008
Location: San Francisco Bay Area

Re: Modding a Kit Headstock

Postby spudmunkey » Wed Dec 21, 2016 4:56 pm

Which headstock did you order on it?

Posts: 35
Joined: Aug 2013
Location: Middle TN.

Re: Modding a Kit Headstock

Postby Tim-H. » Wed Dec 28, 2016 6:47 pm

I personally would tape a piece of paper of the final design your kind of thinking about over the current headstock that you will be doing away with before you go hacking away at it and take a good long look at it for a while. Remember it will be permanent when finished. But with that said, you really may like it too. Show some pics of your thoughts.

Return to Builder's Forum

Who is online

Users browsing this forum: No registered users and 1 guest